Pulsar Battery Pack
The rechargeable Li-Pol Battery Pack EPS3I is designed to power Pulsar and Yukon digital devices, thermal imagers, thermal and night vision riflescopes.
Battery Packs can be used with the following devices: Digisight, Digiforce, Quantum, Apex, Ranger series, and other equipment outfitted with an external power supply jack and Weaver rail or 1/4" socket.
The EPS3I has a capacity of 2.4Ah, is equipped with a mount to be affixed to a Weaver rail.
The EPS3I Battery Pack has a low battery indicator which allows you to permanently control your battery status and avoid unexpected discharge.
The unit features high capacity of up to 9 hours.
Increased working time - One Battery Pack EPS3I allows to increase working time of thermal imaging and digital devices in comparison with time of normal battery packs.
Charge Indicator - External Power Supply EPS3I has a LED charge indicator and can be activated by pushing the button on the front side of the device.
Waterproof plastic body - EPS3I has a hard waterproof plastic body (class IPX5) that prevents all inner parts (electronics, batteries) from climatic and physical impacts.
Mount Weaver - EPS3I has a Weaver mount and can be installed on the body of different devices that possess an applicable rail.
Extension Cable - The EPS3I is supplied with an extension cable which allows it to be stored in any suitable place, like a pocket, when using a NV device in freezing weather and to increase operating time up to total discharge.
Power supply - Battery Type Li-Ion
Rated capacity (Ampere-hour rating) - 2.4 Ah
Voltage at end of discharge - 8.9V
Charging voltage -12.6 V
Full charge time - 4 hours
Full discharge time (I=250 мА) - 9 hours
Physical & operational characteristics
Degree of protection (acc. to IEC60529) - IP Rating IPX5
Mount - Weaver
Operation temperature range, charge / discharge - Under 60±25%R.H 0 ...+45 / -20 ... +60 ͦ C
Dimensions - 85x76x40mm
Weight - 0.23kg